Filters
Performance Anvils
The High Performance Difference
Ok so, what are "Performance Parts" and how are they different? Imagine you own a race car. Do you want the stock carburetor to put into your car or do you want to have the top of the line carburetor to get you to the finish line as fast as possible? With that metaphor in mind, CET Performance parts are specifically designed to increase recovery and decrease maintenance downtime. With that said, there are 3 ways our parts are different than the stock parts you get from the manufacturer.
1. Patented Adjustment System
Maintenance downtime is always an issue, and a large consumer of that time is shimming anvils. Our anvil adjustment system takes shimming anvils down from hours to minutes by offering an in-place solution to the shimming problem. No matter what machine you have or who made it, we can redesign the anvil to accommodate the adjusters and give you an anvil that will last longer and be easier to adjust. See the video below for a quick view of how it works.
How To: Adjusting your Anvils with the CET Adjustment System
Cutting Edge Tooling Product Highlight: Anvil Adjustment from David Reed on Vimeo.
View the Anvil Adjustment System
2. Advanced Materials and Coatings
Using advanced materials, we have removed the need for chromed anvils in most applications. Our high performance anvils are made from a high nickel alloyed steel that becomes harder as it sees wear. On average, using anvils made from this material will double the life of your anvils. We've also done extensive research on different coating types available for those applications the high nickel alloyed steel won't work in. We offer the traditional chrome that you're accustomed to, but also a carbide coating that lasts, at a minimum, twice as long as a comparable chromed anvil. If you're interested in any specialized coating, ask us about it when you contact us!
Flute your Anvils, Run Tighter Tolerances
Anvils are a necessary evil. You have to have them to control the log or the cant, but they also get in the way and can slow things down. They often act like a brake pad. By fluting your anvils, you can decrease the friction on the production line which allows you to run tighter tolerances in your machine.
-
Dial Indicator
Cutting Edge Tooling$60.001/2" Range dial indicator that reads 0-100 at 0.001" per mark and is accurate +/-0.001". Includes NIST Traceability Certification. Item can be orde...
View full details -
Adjustable Head
Cutting Edge Tooling$45.00This is the adjustable head that goes on the end of the indicator adjuster arm (DMI-3). It can be used with other dial style indicators but it com...
View full details -
Waterproof Carrying Case
Cutting Edge Tooling$59.00Each DMK-1 is stored and shipped in a foam fitted water tight case that will protect the entire kit from corrosion. All pertinent documentation wi...
View full details -
Magnets - 176 lbs Pull Magnet
Cutting Edge Tooling$54.00High Magnetic (176 lb. magnetic pull) Indicator Base with On/Off Switch. Each kit comes standard with 2 DMI-5s. Item can be ordered individually.
-
Indicator Button
Cutting Edge Tooling$4.45This button is used at the bottom of the indicator to give a wider contact point and is black oxide coated to prevent rust and corrosion. Item can ...
View full details -
Double Mag Base Kit 1
Cutting Edge Tooling$525.00Double Mag Base Kit (Contains: 1 Double Mag Base, 1 SPI Dial Indicator, 1 Dial Indicator Arm & 2 - 176 lbs pull magnets) Cutting Edge Tooling, ...
View full details