Cutting Edge Tooling

1/4-20 X 1/2” Guide Lubrication Screw with 1/16” ported hole (STEEL) 

1/4-20 x 1/2” Guide Lubrication Screw with 5/64” ported hole Brass (Phillips head)

1/4-20 x 3/4” Guide Lubrication Screw with 5/64” ported hole Brass (Phillips head)

1/4-20 X 5/8” Guide Lubrication Screw with 1/16” ported hole (STEEL)  

This is the adjustable head that goes on the end of the indicator adjuster arm (DMI-3). It can be used with other dial style indicators but it com...

The 7.5" and 8.5" long guide cutter arms are adjustable and each already come pre-loaded with adjustment screws.

Choose your thickness and bolt size

Choose your diameter size or Anvil Adjuster Caps.

Choose your Anvil Set Screw Length

Choose your size of adjuster

1/2" Range dial indicator that reads 0-100 at 0.001" per mark and is accurate +/-0.001". Includes NIST Traceability Certification. Item can be orde...

Double Mag Base Kit (Contains: 1 Double Mag Base, 1 SPI Dial Indicator, 1 Dial Indicator Arm & 2 - 176 lbs pull magnets) Cutting Edge Tooling, ...

This digital indicator is attached to the guide mic bar and is extremely precise with a 0.00005" Resolution. Item can be ordered individually.  

What is a Guide Checking Stand? Efficiency is key in today's sawmill world. The growing demand to be more precise AND run production makes simple m...

Each guide micrometer is placed in a foam fitted waterproof case. Item can be ordered individually.  

This button is used at the bottom of the indicator to give a wider contact point and is black oxide coated to prevent rust and corrosion. Item can ...

Every pair of guide cutter arms already come pre-loaded with an insert, insert screw, wrench and adjustment screw (if applicable). Sold individually.

The 1100R2 is a 3 sided carbide insert made for use with all CET style guide cutter arms. The unique design of the guide cutter arms allow for you...

Long Guide Micrometer (Single Mic Head) are available in several lengths, if you need a specific length not listed, please inquire. Available in 12...

3 axis pivoted articulating arm. The 3 axes allow for you to reconfigure the arm any way that's required. It is black oxide coated to prevent rust...

High Magnetic (176 lb. magnetic pull) Indicator Base with On/Off Switch. Each kit comes standard with 2 DMI-5s. Item can be ordered individually.  

Sherman Style Cutter (7.5” Long) Left, Right or set of both.  Each PAIR of Guide Cutter Arms are pre-loaded with the following items: Guide Cutter...

USNR Style Cutter (8.5” Long) Left, Right or set of both. Each PAIR of Guide Cutter Arms are pre-loaded with the following items: Guide Cutter Ins...

Each DMK-1 is stored and shipped in a foam fitted water tight case that will protect the entire kit from corrosion. All pertinent documentation wi...