Biolube Saw Lubricants

LUBIE GP

Our best general-purpose synthetic oil blend for most wood processing applications. Works best in Lubie Spray System and wick. Economical; over twice the lubricity of diesel. No odor, non-staining.

LUBIE #2

A synthetic oil blended saw lubricant formulated for an economy with more lubricating strength than diesel fuel and safe for spray systems.

LUBIE #2 TECHNICAL DATA LUBIE #2 SAFETY DATA

LUBIE #210 SPF SAW LUBE

A new and unique synthetic oil blend formulated specifically to prevent softwood (SPF) pitch build-up that will not get gummy or burn the blade. Designed to lubricate, cool, and retard resin and pitch build-up on the band saw blades, circular saw blades, and another wood tooling. Additionally, it provides over twice the lubricating strength of diesel fuel. Low-cost, odorless, non-irritating to skin, non-toxic, environmentally friendly and does not contain silicones. Will not stain or discolor wood. Lubie 210 replaces diesel fuel in spray, drip, and wick systems. Mills using about 2 quarts per shift of 210 find the cost lower than diesel fuel while eliminating the fire hazard, personal safety, and odor problems of diesel.

LUBIE #3ST

Water-based fluoropolymer and synthetic lubricant blend ideal for thin kerf saw blades, moulder, and finger joint knives. Non-flammable, biodegradable, no silicone, no odor, and no health hazard. Generally used in a spray system.

LUBIE #3ST TECHNICAL DATA LUBIE #3ST SAFETY DATA

LUBIE #43 CONCENTRATE

A highly concentrated water-based fluoropolymer lubricant, coolant, cleaner generally diluted to a 10% solution with water that is very effective on all thin kerf circular saws, finger joint knives, and molders knives. Lubie 43 is formulated to prevent heat and pitch build-up on thin kerf tooling, Customers report thin kerf saws do not overheat and distort and report that finger joint knives and molder tooling runs longer with less tear-out.

LUBIE #4

Water-based fluoropolymer and synthetic lubricant blend ideal for thin kerf saw blades, moulder, and finger joint knives. Non-flammable, biodegradable, no silicone, no odor, and no health hazard. Generally used in a spray system.

LUBIE #4 TECHNICAL DATA LUBIE #4 SAFETY DATA

LUBIE #5

Water-based hardwood formula. Concentrated synthetic emulsion with extremely high lubricity and good cleaning ability. Non-flammable, no silicone, no odor, biodegradable, and no health hazard.

LUBIE #5 TECHNICAL DATA LUBIE #5 SAFETY DATA

LUBIE #7-WG

A low-cost, winter-grade with cold-weather flow characteristics. No health hazards.

LUBIE #8

Synthetic blended oil lubricant designed for use on hardwoods and softwoods where saw performance is critical. The flashpoint is >400 degrees F, mild odor, no silicone, biodegradable, and low health hazard.

LUBIE #9

High-performance concentrated water-based high-grade synthetic lubricant for both hardwood and softwood sawing. Designed to be diluted with water for the economy. Non-flammable, non-hazardous, environmentally friendly, with a mild pine odor. Ideally suited for heated pallet shops cutting all species.

LUBIE #9 TECHNICAL DATA LUBIE #9 SAFETY DATA

LUBIE #200

A moulder bed lubricant; a blended odorless, fast-evaporating formulation of synthetic lubricants. Choose from three different viscosities.

LUBIE GPX

A bed lube for cedar. A unique blended formulation of synthetic lubricants in a fast evaporating solvent carrier. Formulated to reduce friction, decrease heat and prevent wood resin build-up on moulder beds, planer beds, and other wood transfer equipment. Lubie GPX dries very quickly, leaving a durable lubricating film on the bed. Wood staining, painting, laminating, and other finishing operations generally are not affected because there is no silicon, grease, or wax used in the formulation. Designed for use in automatic, semi-automatic, and manual bed injector systems. The very low viscosity allows it to also be used in spray bottles.

LUBIE GPX TECHNICAL DATA LUBIE GPX SAFETY DATA