Skip to content
HELPING WITH YOUR SAWMILL, FILING ROOM, SAW REPAIR, NARROW BAND, AND EQUIPMENT NEEDS
HELPING WITH YOUR SAWMILL, FILING ROOM, SAW REPAIR, NARROW BAND, AND EQUIPMENT NEEDS

BIOLUBE #43

by BIOLUBE
SKU GL-43-1
SIZE

BIOLUBE #43 is an extra concentrate water-based Teflon-type lube.  A highly concentrated water-based fluoropolymer lubricant/coolant/cleaner generally diluted to a 10% solution with water that is very effective on all thin kerf circular saws, finger joint knives, and molders knives. Biolube Lubie #43 is formulated to prevent heat and pitch build-up on thin kerf tooling, Customers report thin kerf saws do not overheat and distort and report that finger joint knives and molder tooling runs longer with less tear-out.

Biolube Lubie® #43 is a concentrated water based floropolymer lubricant / coolant / cleaner generally diluted to a 10% solution with water that is very effective on all thin kerf circular saws, finger joint knives and moulders knives. Biolube Lubie® #43 is formulated to prevent heat and pitch build-up on thin kerf tooling. Customers report thin kerf saws do not over heat and distort and that finger joint knives and molder tooling runs longer with less tear-out.

  • Biolube Lubie #43 is non flammable, non toxic and biodegradable.
  • It does not contain any chemicals listed in SARA Title III, Section 313 or in OSHA 29 CFR 1910.
  • #3 does not contain silicones and will not stain or discolor wood.

Biolube Lubie® #43 is most effectively applied diluted at 10:1 with water through Biolube's Lubie® spray systems, which give the ultimate in application and volume adjustment. Other spray systems have also run #43 effectively.

Best product for your needs of:

  • Waterbase
  • Softwood
  • Freezable
  • Dilutable
  • Wide Band
  • Narrow Band
  • Gang Rip
  • Finger Jointer

BIOLUBE Lubie #43 Technical Data

BIOLUBE Lubie #43 Safety Data

Specifications

Description_tag BIOLUBE 43 is an extra concentrate water-based Teflon-type lube. A highly concentrated water-based fluoropolymer lubricant/coolant/cleaner generally diluted to a 10% solution with water, is very effective on all thin kerf circular saws, finger joint knives, and molders knives, preventing heat and pitch build-up on thin kerf tooling.
Title_tag BIOLUBE 43 extra concentrate water-based Teflon-type lube