
CAPABILITIES
ProGrind Tub Grinders offer industry-leading, user-friendly controls, clutch protection and a variety of hammer options for grinding versatility. The tub on each model tilts up to 90 degrees for easy access to the hammermill, screens and lower auger area. Precision Husky offers six rugged models, each built with ease of operation, cost and β always β your productivity in mind.
PERFORMANCE
There is nothing average about our base model. With its 200 to 230HP diesel engine, the 900 may be just the thing for your wood waste operation. Itβs versatile, with different hammer options. The tub tilts 38 degrees for easy access to the hammermill, screens and lower auger area.
Like all of our industry-leading grinders, the 900 is designed for maximum productivity and low maintenance.
SPECIFICATIONS
-
GENERAL DIMENSIONS SPECS
Transport Length
18β-6β [5.64 m]
Trans. Length w/Conveyor
24β-9β [7.62 m] Transport Height
7β-7β [2.29 m]
Transport Width
7β-5β [2.28 m]
Loading Height
7β-7β [2.29 m]
Tongue Weight
800-900 lbs. [362-408 kg]
Axle Weight 9,400 lbs. [4,264 kg]
Gross Weight
10,200 lbs. [4,826 kg]
Gross Weight w/Conveyor
10,900 lbs. [4,944 kg]
-
ENGINE
SPECS
Horsepower
200 to 230
Air Cleaner
Donaldson Dry Type
Fuel Capacity
30 gal. [114 l]
-
DRIVE TRAIN SPECS
Clutch
Wichita 11β [28 cm]
Fluid Coupler
Transfluid 13 KRU
Drive Shaft
Spicer 1410; Rated @820 ft -lb Final Drive
1:1, 2400 RPM
-
HAMMERMILL
SPECS
Hammer Swing Diameter
26 1/4β [67 cm]
Hammers
2β [5.08 cm] Thick, Machined to 1 7/8β [5 cm] in Hammer Swing Area
Opening
35β X 25 3/8β [89 cm x 64.2 cm]
Length 33 1/2β [84 cm] Diameter 16 7/8β [43 cm] With 9β [23 cm] Diameter Center
-
TUB
SPECS
Inside Width
6β-6β [2 m]
Flare Width
7β-5β [2.29 m]
Depth
38β [96 cm]
Walls
3/8β [9.5 mm] Steel Plate with 1/8β [3.2 mm] Flares
Agitators
Four 1/4 x 3β [.64 cm x 7.6 cm]
Speed
Variable, Up to 6 RPM Forward and Reverse; Auto Reverses if Jammed, or RPMs below 1800
Drive
10,000 in. lbs [1,130 nm] Torque; Triple-50 Chain, Overload Protected Hydraulic Motor
-
DISCHARGE SYSTEM SPECS
Augers
Two 12β [30 cm] Hydraulic Driven
Optional Stacking Conveyor
8β-0β [2.44 m] Long, 30β [76.2 cm] Wide, 6β-0β [1.8 m] Stacking Height
Controls
Ignition, Engine Speed, Tub Controls, Augers/Conveyor Controls, Table Raise/Lower
Gauges
Engine Temp, Voltmeter, Fuel Gauge, Tach/Hourmeter, Mill Hourmeter, Tub Pressure Gauge, Auger Pressure Gauge, Diagnostic Lights
-
OPTIONAL EQUIPMENT
SPECS
Stacking Conveyor
8β-0β [2.44 m] Long, 30β [76.2 cm] Wide, 6β-0β [1.8 m]
Magnetic Roller
Magnetic Conveyor Drive Pulley with Nail Chute
Hammers
12 1/2 lb [5.68 kg] Flail Hammer with Optional Replaceable Tip