Skip to content
HELPING WITH YOUR SAWMILL, FILING ROOM, SAW REPAIR, NARROW BAND, AND EQUIPMENT NEEDS
HELPING WITH YOUR SAWMILL, FILING ROOM, SAW REPAIR, NARROW BAND, AND EQUIPMENT NEEDS

Precision PG-2000 Tub Grinder

SKU PRECISION-PG1500-TUB-GRINDER

CAPABILITIES

ProGrind Tub Grinders offer industry-leading, user-friendly controls, clutch protection and a variety of hammer options for grinding versatility. The tub on each model tilts up to 90 degrees for easy access to the hammermill, screens and lower auger area. Precision Husky offers six rugged models, each built with ease of operation, cost and – always – your productivity in mind.

PERFORMANCE

Precision PG-2000 Tub Grinder is built with ease of use and low maintenance in mind, the 2000 has made a name for itself in the woods. Its features include a hydraulic coupler and self-adjusting clutch and a tilt tub with no-bolt screens. The shock-resistant hammermill is equipped with 12lb. replaceable tip hammers.

Whether its green waste, pallets or bark mulch, the ProGrind 2000 delivers the power you need for effective wood waste management.

SPECIFICATIONS

  • GENERAL DIMENSIONS
    SPECS
    Transport Length 
    42’ 0” [12.8 m] 5th wheel with 24’ [7.32 m] conveyor
    Transport Height
    13’ 4” [4.11 m]
    Loading Height
    8’-5” [2.6 m]
    Gross Weight
    25,300 lbs. [11,478 kg]
    Tongue Weight
    5,300 lbs. [2,404 kg] approximately
    Axle Weight
    20,000 lbs. [9,072 kg]
  • DIESEL ENGINE
    SPECS
    Horsepower
    390 to 450
    Air Cleaner
    Donaldson Dry Type
    Fuel Capacity
    120 gal. [454 l]
  • DRIVE TRAIN
    SPECS
    Clutch
    Twin Disc 14” [35.56 cm]
    Fluid Coupler
    Transfluid
    Drive Shaft
    Spicer 1810
    Final Drive
    1:1, 2100 RPM
  • HAMMERMILL
    SPECS
    Opening
    25 7/16” x 45 5/8” [64.6 cm x 116 cm]
    Length
    44 5/16” [112.55 cm]
    Deflector
    1/2” [12.7 mm] Thick T-1 Steel Thrown Object Deflector
    Diameter
    16 7/8” [42.86 cm] OD with 9” [22.86 cm] Diameter Center
    Shaft
    5” [12.7 cm] Diameter Hardened Alloy Steel
    Mill Plates
    2” [5 cm] Thick, Machined to 1 7/8” [4.80 cm] in hammer swing area
    Hammer Swing Diameter
    26 1/4” [66.68 cm] diameter
    Bearings
    3 7/16” [8.73 cm] Double Row Spherical
    Hammers
    (2) 3/4" [1.91 cm] Thick, 2,405 sq. in. [1.56 sq. m]
  • TUB
    SPECS
    Loading Height
    9’ 4” [2.9 m]
    Width
    10’ 2” [3.11 m]
    Inside Width
    8’-0” [2.44 m]
    Tub Flares
    (2) Removable sections. Located 180 degrees apart to allow legal transport on public roadways.
    Depth
    4’ 0” [1.22 m]
    Wall Thickness
    3/16” [4.75 mm] steel with (8) 3/16” [4.75 mm] stiffeners welded vertically to support tub and flares.
    Fin Agitators
    (8) 3/8” x 3” [9.53 mm x 76.2 mm]
    Floor Thickness
    3/8” [9.53 mm] plate.
    Tub Guides
    (8) guide rollers
    Tub Drive
    18,000 in. lbs. [2,034 nm] of Torque.Overload protected hydraulic motor, 4:1 Planetary Gearbox: Triple 60 Chain
    Load Sensor
    Electro-hydraulic. Maximize engine RPM and material feed rate to help prevent clogging. Automatic reversing of tub when engine overloads.
    Tub Rotation
    Varible speed forward and reverse up to 7 1/2 RPM by means of a flow control located in control panel.
  • DISCHARGE SYSTEM
    SPECS
    Discharge Augers
    Dual 12” [30.48 cm] diameter augers are hydraulically driven
    Stacking Conveyor
    24' 0" [6.10 m] long, 30' [76.2 cm] wide: 14' 0" [4.27 m] stacking height
  • MORE
    SPECS
    Gauge Optional Equipment
    Standard and Custom Sizes Available (48 qty.) 5 lb [2.27 kg] Flail Hammers. 3/4” [1.91 cm] thick at base and 1” [2.54 cm] at the tip, heat treated and hard surfaced.
    Gauge Pintle Hitch
    Pintle hitch assembly with 3” [7.62 cm] pintle eye Magnetic roller is installed on the stacking conveyor which separates metals from the ground material. Once the magnetic roller releases the metal, it slides down the discharge chute and is stacked away from the ground material.
    Remote Control
    To activate the tubs rotation, change the direction of the tub rotation, and stop the tub.
    Air Compressors
    Air compressor is mounted on the unit for the convenience of using air tools on site.
    Control Panel
    Ignition, Engine Speed, Tub Controls, Auger/Conveyor Controls, Table Raise/Lower Gauges Engine Temp, Engine Oil Pressure, Voltmeter, Fuel Gauge, Tach/Hourmeter, Tub Pressure Gauge, Auger Pressure Gauge