Skip to content
HELPING WITH YOUR SAWMILL, FILING ROOM, SAW REPAIR, NARROW BAND, AND EQUIPMENT NEEDS
HELPING WITH YOUR SAWMILL, FILING ROOM, SAW REPAIR, NARROW BAND, AND EQUIPMENT NEEDS

Precision PG-1000 Tub Grinder

SKU PRECISION-PG1000-TUB-GRINDER

CAPABILITIES

ProGrind Tub Grinders offer industry-leading, user-friendly controls, clutch protection and a variety of hammer options for grinding versatility. The tub on each model tilts up to 90 degrees for easy access to the hammermill, screens and lower auger area. Precision Husky offers six rugged models, each built with ease of operation, cost and – always – your productivity in mind.

PERFORMANCE

The PG-1000 has efficiency, versatility, low noise and ease of maintenance, the 1000 can’t be beat. The 250HP diesel engine powers multiple hammer options and comes equipped with dual 12 inch hydraulically driven augers.

The fluid coupling clutch protection dramatically reduces clutch wear and virtually eliminates the possibility of clutch failure.

SPECIFICATIONS

  • GENERAL DIMENSIONS
    SPECS
    Transport Length w/14' Conveyor
    30’-0” [9.2 m]
    Trans. Length w/20' Conveyor
    26’-0” [8.9 m]
    Transport Height
    12’-10” [3.9 m]
    Transport Width
    8’-5” [2.6 m]
    Loading Height
    9’-0” [2.7 m]
    Tongue Weight
    2,200 lbs. [998 kg]
    Axle Weight
    15,500 lbs. [7031kg]
    Gross Weight
    17,500 lbs. [7938kg]
  • ENGINE
    SPECS
    Horsepower
    240-300HP [179-224kw]
    Air Cleaner
    Donaldson Dry Type
    Fuel Capacity
    60 gal. [227 l]
  • DRIVE TRAIN
    SPECS
    Clutch
    Twin-Disc SP214
    Fluid Coupler
    Transfluid 17 KRU
    Drive Shaft
    Spicer 1610; Rated @2200 ft -lb [2,983 nm]
    Final Drive
    1:1, 2200 RPM
  • HAMMERMILL
    SPECS
    Opening
    35” X 25 7/16” [89 cm x 64.2 cm]
    Length
    33 1/2” [84 cm]
    Deflector
    1/2” [12.7 mm] Thick T-1 Steel Thrown Object Deflector
    Diameter
    16 7/8” [43 cm] With 9” [23 cm] Diameter Center
    Shaft
    5” [12.7 cm] Diameter Hardened Alloy Steel
    Mill Plates
    2” [5.08 cm] Thick, Machined to 1 7/8” [4.75 cm] in Hammer Swing Area
    Hammers
    Replaceable Tip Flail Hammer Standard; Optional 5 lb [2.27 kg] Flail Hammer Available; All Hammers Heat Treated and Hard Surfaced
    Hammer Swing Diameter
    26 1/4” [66.68 cm]
    Hammer Rods
    1 1/2” [3.8 cm] Hardened Alloy Steel (6)
    Bearings
    2 15/16” [7.62 cm] Double Row Spherical
  • TUB
    SPECS
    Inside Width
    6’-6” [2 m]
    Flare Width
    8’-5” [2.6 m]
    Depth
    48” [1.22 m]
    Walls
    3/16” [4.75 mm] Steel Plate with 3/16” [4.75 mm] Flares
    Agitators
    Four 3/8” X 3” [9.53 mm x 76.2 mm]
    Speed
    Variable, Up to 10 RPM Forward and Reverse
    Drive
    10,500 in. lbs. [1,186 nm] Torque; Overload Protected Hydraulic Motor, 4:1 Planetary Gearbox; Triple-50 Chain
  • DISCHARGE SYSTEM
    SPECS
    Augers
    Two 12” [30.48 cm] Hydraulic Driven
    Stacking Conveyor
    20’-0” [6.10 m] Long, 30” [76.2 cm] Wide; 12’-10” [3.9m] Stacking Height complete with magnetic drive pulley and nail chute
  • CONTROL PANEL
    SPECS
    Controls
    Ignition, Engine Speed,Tub Controls, Augers/Conveyor Controls, Table Raise/Lower
    Gauges
    Engine Temp, Engine Oil Pressure, Voltmeter, Fuel Gauge, Tach/Hourmeter, Tub Pressure Gauge, Auger Pressure Gauge