Skip to content
HELPING WITH YOUR SAWMILL, FILING ROOM, SAW REPAIR, NARROW BAND, AND EQUIPMENT NEEDS
HELPING WITH YOUR SAWMILL, FILING ROOM, SAW REPAIR, NARROW BAND, AND EQUIPMENT NEEDS
NorthTech Single Surface Planer NT 660S-25HCVS-2034, Smith Sawmill Service

NorthTech Single Surface Planer NT 660S-25HCVS-2034

by NorthTech
SKU NORTHTECH-1-SURFACE PLANER-NT-660S-25HCVS-2034

MODEL Single Surface Planer NT 660S-25HCVS-2034

  • FEATURES

    • Helical 4" cutter head provides high chip removal rate, superior surface finish & low noise level (under 85 dba).

    • Powerful 20HP cutter head motor; 2HP feed motor makes this planer ideal for heavy duty planing and meets high production requirements. Arranged with Y-Delta soft start controls (Square D).

    • Main motor is Nema rated and standard with 2 year warranty and service throughout North America.

    • Digital positioning controller for convenient thickness setting (with memory control to 99 thickness settings).

    • Variable feed speed is driven by a VFD and TECO inverter duty DC motor (0-90' min) with LED readout of feeding speed.

    • Powered table elevation for fast and convenient thickness setting. Opening has been increased to 12" on NT-660S series planers vs. 8" on the standard NT-660 planers.

    • Extra heavy, rib reinforced cast iron table is surface precision ground. 660S-20HCVS has (4) precision 35mm jack screws to support the planer's rugged construction.

    • Adjustable bed rollers ensure fast and proper positioning with regards to rough lumber to finished glue panels.

    • UV rubber outfeed roller provides optimum finish with reduced

    • Corrugated sectional infeed roller has independent yield for running strip stock of varying thickness without the danger of kick back.

    • Anti-kickback fingers equipped at the infeed end provide added safety for the operator.

    • Raising and lowering limit controls for powered table elevation

  • SPECS

    • Top Head Hp. = 25 Hp.

    • Voltage/ Freq. = 460 Volt 60Hz

    • Phase = 3 Phase

    • Amp Requirement = 29 Amps

    • Feed Hp. = 2 Hp.

    • Feed System = (2) Segmented/(1) Rubber Roll

    • Drive System = Belt

    • Feed Speed = 5 - 75 FPM

    • Variable Speed = Inverter Controlled

    • Elevation Hp. = 1 Hp.

    • Elevation Style = REC 727M Elevation Control

    • Elevation Sys. = (4) Post Jack Screw

    • Total Hp. = 28 Hp.

    • Electronics = CE Approved Components

    • Dual Voltage = 230/460 Volt

    • Control Voltage = 110 Volt

    • Programmable = REC 727M Elevation Control

    • Min. Length = 10''

    • Min. Width = 1''

    • Max. Width = 26"

    • Min. Thickness = 3/16"

    • Max. Thickness = 12''

    • Cutter Head RPM = 1800 Rpm

    • Tooling = 15 x 15 x 2.5 mm

    • Head Type = Dynamically Balanced Helical Head

    • Cutter Head Dim = 4'' x 26''

    • Cut Head Matl. = Alloy Steel

    • Rows of Cutters = 6 Rows

    • No. of Inserts = 156 Inserts

    • Insert Size = 15 x 15 x 2.5 mm

    • Dust Collection = (1) 6'' @ 981 CFM

    • Digital Display = Elevation and Feed Speed

    • Powered Rollers = (3) Top Powered Rollers

    • Idle Rollers = (2) Idle Bed Rollers

    • Pressure Shoes = 26'' Spring Loaded Pressure

    • Frame Const. = 1/4'' Steel/Cast Iron Construction

    • Decibel Rating = 70 dB

    • Net Weight = 2420 Lbs.

    • Gross Weight = 2770 Lbs.

    • Machine Dims. = 44'' x 39'' x 55''

    • Packaging Dims = 52'' x 51'' x 55''

Item ID: 1093

×





×