NorthTech Gang Rip Saw MRS14N-5032

NorthTech Gang Rip Saw NT MRS14N-5032

• FEATURES
• SPECS

• FEATURES

  • Shown with OPTIONAL Infeed Table

  • Close link chain vs. open (no dust or pinch point)

  • Oiler has twice the number of lube points (critical)

  • The VS adjustment location on the 14N.

  • Can cut up to 4-15/16" with 14" blade vs. the MRS-12 12" blade 3-15/16''.

  • * Can run 12" as well on the MRS-14N*

  • Bottom kickback fingers for added safety

  • Saws, with proper tooling and material, can glue line

  • * Include one laser and bracket

  • * Include (1) carbide blades: 12" x 30T x 70mm x 3.5mm kerf

  • (1) Tool box

  • Warranty is one year parts

  • All machines are tested stateside prior to shipment providing trouble free start up.

• SPECS
  

  • Main Motor Hp. = 50 Hp.

  • Voltage/ Freq. = 230 Volt 60Hz

  • Phase = 3 Phase

  • Amp Requirement = 70.3 Amps

  • Feed Hp. = 2 Speed 1.5 / 3 Hp.

  • Feed System = Feed Chain

  • Feed Speed = 25 - 120 FPM

  • Variable Speed = Variable Speed Pulley

  • Elevation Hp. = 1/4 Hp.

  • Elevation Style = Manual Wheel Adjustment

  • Elevation Sys. = Jack Screw / Linear Guides

  • Total Hp. = 53.25 Hp.

  • Electronics = CE Approved Components

  • Dual Voltage = Elevation Arbor Motors

  • Control Voltage = 110 Volt

  • Assisted Start = Wye Delta

  • Pass-Line = 33-1/2''

  • Min. Length = 17-3/4''

  • Min. Width = 1/2''

  • Max. Width = 27-1/8''

  • Min. Thickness = 5/16''

  • Max. Thickness = 4-15/16''

  • Arbor Rpm = 3570 Rpm

  • Blade Size = 12'' Tungsten Carbide Tipped

  • No. of Teeth = 36 Tooth

  • Blade Kerf = 3.5 mm

  • Cleaning System = Brush on Chain

  • Vertical Travel = 3/8'' - 5''

  • Dust Collection = (2) 6'' @ 1962 CFM

  • Arbor Diameter = 70 mm

  • Hold Down Style = Pressure Plate

  • Kickback Finger = (2) Top (1) Bottom Sets

  • Emergency Stop = Push Button

  • Rear E Stop = Push Button

  • Safety Feature = Safety Interlock Switch

  • Guarding = Full Cabinet Enclosure

  • Oiler = Automatic Mechanical Oiler

  • Low Oil Warning = Low Oil Shut-off

  • Fence Type = Adjustable

  • Fence Dims. = 103'' Length

  • Frame Const. = 5/16'' Steel Construction

  • Worktable Dims. = 27-1/8'' x 64''

  • Infeed Table = 13-3/4'' x 103''

  • Laser = 100mw Laser Light & Mount Bracket

  • Decible Rating = 74 dB

  • Net Weight = 4402 Lbs.

  • Gross Weight = 4694 Lbs.

  • Machine Dims. = 67'' x 58'' x 71''

  • Packaging Dims = 72'' x 65'' x 77''

  ITEM ID:1390