Skip to content
HELPING WITH YOUR SAWMILL, FILING ROOM, SAW REPAIR, NARROW BAND, AND EQUIPMENT NEEDS
HELPING WITH YOUR SAWMILL, FILING ROOM, SAW REPAIR, NARROW BAND, AND EQUIPMENT NEEDS

Precision Stationary Chipper

Precision Stationary Chipper, Smith Sawmill Service

The canted side spout design and the position of the knife causes a smooth slicing action. The attack angle of the knife gives a gentle lift to the slab as the knife passes the center line and begins the upward swing turning the slab counterclockwise. The spout has a flat bottom and canted side to give 25% more anvil contact, preventing slapping and wood turning in the wrong direction. Horizontal and vertical anvils give additional life, requiring less maintenance. Both anvils are hard surfaced with colmonoy with a hardness of 62-65, Rockwell C scale. With a four-sided replaceable anvil, maintenance and time are saved. Less horsepower is needed with Precision’s smoother slicing action.

Precision’s UNIQUE and PROVEN design has earned its reputation as "The Best and Most Consistent Chipper in the World." With numerous and custom configurations, we can meet your company’s every need and will provide you with the best quality product in the industry. Precision Husky Corporation is quality driven and service oriented.

 

SPECIFICATIONS

CHIPPER SPECIFICATIONS SIZES
66" (168 CM) CHIPPER
Number of Knives
3, 4, 6, or 8
Disc Diameter
66" [1675 mm]
Max. Operating Rpm
600 rpm
Spout Opening
17" x 37.5" [430 mm x 950 mm]
Approx. Feed Rate
300 fpm [91 mpm]
58" (147 CM) CHIPPER
Number Of Knives
3, 4, 6 or 8 
Disc Diameter
58" [1475 mm]
Max. Operating Rpm
720
Spout Opening
15" x 34" [380 mm x 865 mm]
Approx. Feed Rate
270 fpm [82 mpm]
48" (122) CHIPPER

Number Of Knives
3, 4, 6 or 8 
Disc Diameter
48" [1220 mm]
Max. Operating Rpm
900
Spout Opening
11" x 24" [280 mm x 610 mm]
Approx. Feed Rate
337 fpm [102 mpm]
38" (96 CM) CHIPPER
Number Of Knives
4
Disc Diameter
38" [965 mm]
Max. Operating Rpm
1000
Spout Opening
9" x 20" [229mm x 500mm]
Approx. Feed Rate
250 fpm [76 mpm]

OPTIONS

  • Horizontal Feed
  • Rechipper Spout
  • Discharge
  • Drop or Gravity Feed
  • Helical Wear Plates
  • Left Hand or Right Hand
  • Bottom Discharge
  • Wear Liners
  • 360° Swivel Discharge
  • Top Discharge
  • Carbide Anvils
  • Belt Driven
  • Rear Discharge
  • Two piece Hood
  • Direct Driven
  • Cardbreakers
  • One piece Hood
  • Dissipator for Rear Discharge Chippers
  • Hard Surfaced Counter Knives