CAPABILITIES
ProGrind Tub Grinders offer industry-leading, user-friendly controls, clutch protection and a variety of hammer options for grinding versatility. The tub on each model tilts up to 90 degrees for easy access to the hammermill, screens and lower auger area. Precision Husky offers six rugged models, each built with ease of operation, cost and – always – your productivity in mind.
PERFORMANCE
Precision PG-2000 Tub Grinder is built with ease of use and low maintenance in mind, the 2000 has made a name for itself in the woods. Its features include a hydraulic coupler and self-adjusting clutch and a tilt tub with no-bolt screens. The shock-resistant hammermill is equipped with 12lb. replaceable tip hammers.
Whether its green waste, pallets or bark mulch, the ProGrind 2000 delivers the power you need for effective wood waste management.
SPECIFICATIONS
-
GENERAL DIMENSIONS SPECS
Transport Length
42’ 0” [12.8 m] 5th wheel with 24’ [7.32 m] conveyor
Transport Height
13’ 4” [4.11 m]
Loading Height
8’-5” [2.6 m]
Gross Weight
25,300 lbs. [11,478 kg]
Tongue Weight
5,300 lbs. [2,404 kg] approximately
Axle Weight 20,000 lbs. [9,072 kg]
-
DIESEL ENGINE
SPECS
Horsepower
390 to 450
Air Cleaner
Donaldson Dry Type
Fuel Capacity
120 gal. [454 l]
-
DRIVE TRAIN SPECS
Clutch
Twin Disc 14” [35.56 cm]
Fluid Coupler
Transfluid
Drive Shaft
Spicer 1810
Final Drive
1:1, 2100 RPM
-
HAMMERMILL
SPECS
Opening
25 7/16” x 45 5/8” [64.6 cm x 116 cm]
Length
44 5/16” [112.55 cm]
Deflector
1/2” [12.7 mm] Thick T-1 Steel Thrown Object Deflector
Diameter
16 7/8” [42.86 cm] OD with 9” [22.86 cm] Diameter Center
Shaft 5” [12.7 cm] Diameter Hardened Alloy Steel
Mill Plates
2” [5 cm] Thick, Machined to 1 7/8” [4.80 cm] in hammer swing area
Hammer Swing Diameter 26 1/4” [66.68 cm] diameter Bearings 3 7/16” [8.73 cm] Double Row Spherical
Hammers (2) 3/4" [1.91 cm] Thick, 2,405 sq. in. [1.56 sq. m]
-
TUB
SPECS
Loading Height 9’ 4” [2.9 m] Width 10’ 2” [3.11 m] Inside Width
8’-0” [2.44 m]
Tub Flares
(2) Removable sections. Located 180 degrees apart to allow legal transport on public roadways.
Depth
4’ 0” [1.22 m]
Wall Thickness
3/16” [4.75 mm] steel with (8) 3/16” [4.75 mm] stiffeners welded vertically to support tub and flares.
Fin Agitators
(8) 3/8” x 3” [9.53 mm x 76.2 mm]
Floor Thickness 3/8” [9.53 mm] plate. Tub Guides
(8) guide rollers Tub Drive
18,000 in. lbs. [2,034 nm] of Torque.Overload protected hydraulic motor, 4:1 Planetary Gearbox: Triple 60 Chain
Load Sensor
Electro-hydraulic. Maximize engine RPM and material feed rate to help prevent clogging. Automatic reversing of tub when engine overloads.
Tub Rotation Varible speed forward and reverse up to 7 1/2 RPM by means of a flow control located in control panel.
-
DISCHARGE SYSTEM SPECS
Discharge Augers
Dual 12” [30.48 cm] diameter augers are hydraulically driven Stacking Conveyor
24' 0" [6.10 m] long, 30' [76.2 cm] wide: 14' 0" [4.27 m] stacking height -
MORE
SPECS
Gauge Optional Equipment
Standard and Custom Sizes Available (48 qty.) 5 lb [2.27 kg] Flail Hammers. 3/4” [1.91 cm] thick at base and 1” [2.54 cm] at the tip, heat treated and hard surfaced.
Gauge Pintle Hitch
Pintle hitch assembly with 3” [7.62 cm] pintle eye Magnetic roller is installed on the stacking conveyor which separates metals from the ground material. Once the magnetic roller releases the metal, it slides down the discharge chute and is stacked away from the ground material.
Remote Control To activate the tubs rotation, change the direction of the tub rotation, and stop the tub. Air Compressors Air compressor is mounted on the unit for the convenience of using air tools on site. Control Panel Ignition, Engine Speed, Tub Controls, Auger/Conveyor Controls, Table Raise/Lower Gauges Engine Temp, Engine Oil Pressure, Voltmeter, Fuel Gauge, Tach/Hourmeter, Tub Pressure Gauge, Auger Pressure Gauge
